From eb62f768d0f89c6f7534b1432b86362f56f573ea Mon Sep 17 00:00:00 2001 From: Hari Babu Date: Sun, 17 Mar 2019 02:19:35 +1100 Subject: [PATCH 4/7] New prefer-read target_session_attrs type With this prefer-read option type, application can prefer connecting to a read-only server if available from the list of hosts, otherwise connect it to read-write server --- doc/src/sgml/libpq.sgml | 21 ++-- src/interfaces/libpq/fe-connect.c | 161 ++++++++++++++++++++++---- src/interfaces/libpq/libpq-fe.h | 3 +- src/interfaces/libpq/libpq-int.h | 13 ++- src/test/recovery/t/001_stream_rep.pl | 14 ++- 5 files changed, 177 insertions(+), 35 deletions(-) diff --git a/doc/src/sgml/libpq.sgml b/doc/src/sgml/libpq.sgml index 7b9d219bde..7918e398c7 100644 --- a/doc/src/sgml/libpq.sgml +++ b/doc/src/sgml/libpq.sgml @@ -1577,12 +1577,12 @@ postgresql://%2Fvar%2Flib%2Fpostgresql/dbname target_session_attrs - The supported options for this parameter are, any and - read-write. The default value of this parameter, - any, regards all connections as acceptable. - If multiple hosts were specified in the connection string, based on the - specified value, any remaining servers will be tried before confirming - succesful connection or failure. + The supported options for this parameter are, any, + read-write and prefer-read. + The default value of this parameter, any, regards + all connections as acceptable. If multiple hosts were specified in the + connection string, based on the specified value, any remaining servers + will be tried before confirming succesful connection or failure. @@ -1591,6 +1591,13 @@ postgresql://%2Fvar%2Flib%2Fpostgresql/dbname is considered acceptable. + + If this parameter is set to prefer-read, only a + connection in which read-only transactions are accepted by default + is preferred. If no such connections can be found, then a connection + in which read-write transactions accepted will be considered. + + To find out whether the server supports read-write transactions are not, query SHOW transaction_read_only will be sent upon any @@ -1600,7 +1607,7 @@ postgresql://%2Fvar%2Flib%2Fpostgresql/dbname GUC that is reported by the server upon successful connection. - + diff --git a/src/interfaces/libpq/fe-connect.c b/src/interfaces/libpq/fe-connect.c index 0387d4fd09..4359a3e152 100644 --- a/src/interfaces/libpq/fe-connect.c +++ b/src/interfaces/libpq/fe-connect.c @@ -322,7 +322,7 @@ static const internalPQconninfoOption PQconninfoOptions[] = { {"target_session_attrs", "PGTARGETSESSIONATTRS", DefaultTargetSessionAttrs, NULL, - "Target-Session-Attrs", "", 11, /* sizeof("read-write") = 11 */ + "Target-Session-Attrs", "", 12, /* sizeof("prefer-read") = 12 */ offsetof(struct pg_conn, target_session_attrs)}, /* Terminating entry --- MUST BE LAST */ @@ -1247,6 +1247,8 @@ connectOptions2(PGconn *conn) conn->requested_session_type = SESSION_TYPE_ANY; else if (strcmp(conn->target_session_attrs, "read-write") == 0) conn->requested_session_type = SESSION_TYPE_READ_WRITE; + else if (strcmp(conn->target_session_attrs, "prefer-read") == 0) + conn->requested_session_type = SESSION_TYPE_PREFER_READ; else { conn->status = CONNECTION_BAD; @@ -2141,13 +2143,31 @@ keep_going: /* We will come back to here until there is if (conn->whichhost + 1 >= conn->nconnhost) { - /* - * Oops, no more hosts. An appropriate error message is already - * set up, so just set the right status. - */ - goto error_return; + if (conn->read_write_host_index >= 0) + { + /* + * Getting here means, failed to connect to read-only servers + * and now try connect to read-write server again. + */ + conn->whichhost = conn->read_write_host_index; + + /* + * Reset the host index value to avoid recursion during the + * second connection attempt. + */ + conn->read_write_host_index = -2; + } + else + { + /* + * Oops, no more hosts. An appropriate error message is + * already set up, so just set the right status. + */ + goto error_return; + } } - conn->whichhost++; + else + conn->whichhost++; /* Drop any address info for previous host */ release_conn_addrinfo(conn); @@ -3229,7 +3249,8 @@ keep_going: /* We will come back to here until there is case CONNECTION_CHECK_TARGET: { /* - * If a read-write connection is required, see if we have one. + * If a read-write or prefer-read connection is required, see + * if we have one. * * Servers before 7.4 lack the transaction_read_only GUC, but * by the same token they don't have any read-only mode, so we @@ -3244,8 +3265,8 @@ keep_going: /* We will come back to here until there is * Save existing error messages across the PQsendQuery * attempt. This is necessary because PQsendQuery is * going to reset conn->errorMessage, so we would lose - * error messages related to previous hosts we have tried - * and failed to connect to. + * error messages related to previous hosts we have + * tried and failed to connect to. */ if (!saveErrorMessage(conn, &savedMessage)) goto error_return; @@ -3257,16 +3278,30 @@ keep_going: /* We will come back to here until there is restoreErrorMessage(conn, &savedMessage); goto error_return; } + conn->status = CONNECTION_CHECK_WRITABLE; + restoreErrorMessage(conn, &savedMessage); return PGRES_POLLING_READING; } - else if (conn->transaction_read_only) + else if ((conn->transaction_read_only && + conn->requested_session_type == SESSION_TYPE_READ_WRITE) || + (!conn->transaction_read_only && + conn->requested_session_type == SESSION_TYPE_PREFER_READ)) { - /* Not writable; fail this connection. */ + /* Not a requested type; fail this connection. */ const char *displayed_host; const char *displayed_port; + /* + * The following scenario is possible only for the + * prefer-read mode for the next pass of the list of + * connections as it couldn't find any servers that + * are default read-only. + */ + if (conn->read_write_host_index == -2) + goto consume_checked_target_connection; + /* Append error report to conn->errorMessage. */ if (conn->connhost[conn->whichhost].type == CHT_HOST_ADDRESS) displayed_host = conn->connhost[conn->whichhost].hostaddr; @@ -3276,16 +3311,28 @@ keep_going: /* We will come back to here until there is if (displayed_port == NULL || displayed_port[0] == '\0') displayed_port = DEF_PGPORT_STR; - appendPQExpBuffer(&conn->errorMessage, - libpq_gettext("could not make a writable " - "connection to server " - "\"%s:%s\"\n"), - displayed_host, displayed_port); + if (conn->requested_session_type == SESSION_TYPE_READ_WRITE) + appendPQExpBuffer(&conn->errorMessage, + libpq_gettext("could not make a writable " + "connection to server " + "\"%s:%s\"\n"), + displayed_host, displayed_port); + else + appendPQExpBuffer(&conn->errorMessage, + libpq_gettext("could not make a readonly " + "connection to server " + "\"%s:%s\"\n"), + displayed_host, displayed_port); /* Close connection politely. */ conn->status = CONNECTION_OK; sendTerminateConn(conn); + /* Record read-write host index */ + if (conn->requested_session_type == SESSION_TYPE_PREFER_READ && + conn->read_write_host_index == -1) + conn->read_write_host_index = conn->whichhost; + /* * Try next host if any, but we don't want to consider * additional addresses for this host. @@ -3293,8 +3340,36 @@ keep_going: /* We will come back to here until there is conn->try_next_host = true; goto keep_going; } + + /* obtained the requested type, consume it */ + goto consume_checked_target_connection; + } + + /* + * Requested type is prefer-read, then record this host index + * and try the other before considering it later + */ + if (conn->requested_session_type == SESSION_TYPE_PREFER_READ && + conn->read_write_host_index != -2) + { + /* Close connection politely. */ + conn->status = CONNECTION_OK; + sendTerminateConn(conn); + + /* Record read-write host index */ + if (conn->read_write_host_index == -1) + conn->read_write_host_index = conn->whichhost; + + /* + * Try next host if any, but we don't want to consider + * additional addresses for this host. + */ + conn->try_next_host = true; + goto keep_going; } + consume_checked_target_connection: + /* We can release the address list now. */ release_conn_addrinfo(conn); @@ -3360,11 +3435,33 @@ keep_going: /* We will come back to here until there is PQntuples(res) == 1) { char *val; + bool readonly_server; val = PQgetvalue(res, 0, 0); - if (strncmp(val, "on", 2) == 0) + readonly_server = (strncmp(val, "on", 2) == 0); + + /* + * Server is read-only and requested mode is read-write, + * ignore it. Server is read-write and requested mode is + * prefer-read, record it for the first time and try to + * consume in the next scan (it means no read-only server + * is found in the first scan). + */ + if ((readonly_server && + conn->requested_session_type == SESSION_TYPE_READ_WRITE) || + (!readonly_server && + conn->requested_session_type == SESSION_TYPE_PREFER_READ)) { - /* Not writable; fail this connection. */ + /* + * The following scenario is possible only for the + * prefer-read mode for the next pass of the list of + * connections as it couldn't find any servers that + * are default read-only. + */ + if (conn->read_write_host_index == -2) + goto consume_checked_write_connection; + + /* Not a requested type; fail this connection. */ PQclear(res); restoreErrorMessage(conn, &savedMessage); @@ -3377,16 +3474,28 @@ keep_going: /* We will come back to here until there is if (displayed_port == NULL || displayed_port[0] == '\0') displayed_port = DEF_PGPORT_STR; - appendPQExpBuffer(&conn->errorMessage, - libpq_gettext("could not make a writable " - "connection to server " - "\"%s:%s\"\n"), - displayed_host, displayed_port); + if (conn->requested_session_type == SESSION_TYPE_READ_WRITE) + appendPQExpBuffer(&conn->errorMessage, + libpq_gettext("could not make a writable " + "connection to server " + "\"%s:%s\"\n"), + displayed_host, displayed_port); + else + appendPQExpBuffer(&conn->errorMessage, + libpq_gettext("could not make a readonly " + "connection to server " + "\"%s:%s\"\n"), + displayed_host, displayed_port); /* Close connection politely. */ conn->status = CONNECTION_OK; sendTerminateConn(conn); + /* Record read-write host index */ + if (conn->requested_session_type == SESSION_TYPE_PREFER_READ && + conn->read_write_host_index == -1) + conn->read_write_host_index = conn->whichhost; + /* * Try next host if any, but we don't want to consider * additional addresses for this host. @@ -3395,7 +3504,8 @@ keep_going: /* We will come back to here until there is goto keep_going; } - /* Session is read-write, so we're good. */ + consume_checked_write_connection: + /* Session is requested type, so we're good. */ PQclear(res); termPQExpBuffer(&savedMessage); @@ -3579,6 +3689,7 @@ makeEmptyPGconn(void) conn->sock = PGINVALID_SOCKET; conn->requested_session_type = SESSION_TYPE_ANY; + conn->read_write_host_index = -1; /* * We try to send at least 8K at a time, which is the usual size of pipe diff --git a/src/interfaces/libpq/libpq-fe.h b/src/interfaces/libpq/libpq-fe.h index 6961d7ce8e..4b0fc80df2 100644 --- a/src/interfaces/libpq/libpq-fe.h +++ b/src/interfaces/libpq/libpq-fe.h @@ -73,7 +73,8 @@ typedef enum typedef enum { SESSION_TYPE_ANY = 0, /* Any session (default) */ - SESSION_TYPE_READ_WRITE /* Read-write session */ + SESSION_TYPE_READ_WRITE, /* Read-write session */ + SESSION_TYPE_PREFER_READ /* Prefer read only session */ } TargetSessionAttrsType; typedef enum diff --git a/src/interfaces/libpq/libpq-int.h b/src/interfaces/libpq/libpq-int.h index ccaee68be4..13f971b5a5 100644 --- a/src/interfaces/libpq/libpq-int.h +++ b/src/interfaces/libpq/libpq-int.h @@ -363,7 +363,10 @@ struct pg_conn char *krbsrvname; /* Kerberos service name */ #endif - /* Type of connection to make. Possible values: any, read-write. */ + /* + * Type of connection to make. Possible values: any, read-write, + * prefer-read. + */ char *target_session_attrs; TargetSessionAttrsType requested_session_type; @@ -400,6 +403,14 @@ struct pg_conn pg_conn_host *connhost; /* details about each named host */ char *connip; /* IP address for current network connection */ + /* + * First read-write host index in the connection string. + * + * Initial value is -1, then the index of the first read-write host, -2 + * during the second attempt of connection to avoid recursion. + */ + int read_write_host_index; + /* Connection data */ pgsocket sock; /* FD for socket, PGINVALID_SOCKET if * unconnected */ diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl index beb45551a2..0e398136a5 100644 --- a/src/test/recovery/t/001_stream_rep.pl +++ b/src/test/recovery/t/001_stream_rep.pl @@ -3,7 +3,7 @@ use strict; use warnings; use PostgresNode; use TestLib; -use Test::More tests => 26; +use Test::More tests => 29; # Initialize master node my $node_master = get_new_node('master'); @@ -117,6 +117,18 @@ test_target_session_attrs($node_master, $node_standby_1, $node_master, "any", test_target_session_attrs($node_standby_1, $node_master, $node_standby_1, "any", 0); +# Connect to standby1 in "prefer-read" mode with master,standby1 list. +test_target_session_attrs($node_master, $node_standby_1, $node_standby_1, "prefer-read", + 0); + +# Connect to standby1 in "prefer-read" mode with standby1,master list. +test_target_session_attrs($node_standby_1, $node_master, $node_standby_1, + "prefer-read", 0); + +# Connect to node_master in "prefer-read" mode with only master list. +test_target_session_attrs($node_master, $node_master, $node_master, + "prefer-read", 0); + note "switching to physical replication slot"; # Switch to using a physical replication slot. We can do this without a new -- 2.20.1.windows.1